30W QRP 5MHz-55MHz Shortwave FM Radio Transmitting Antenna
30W QRP 5MHz-55MHz Shortwave FM Radio Transmitting Antenna
Auf Lager.
Versandgarantie
Versandgarantie
KOSTENLOSER VERSAND für alle Bestellungen im Vereinigten Königreich . Voll versichert.
Bearbeitungszeit 1 - 3 Werktage. (Buy2fix muss Ihre Bestellung bearbeiten und alle Ihre Artikel strengen Qualitätskontrollen unterziehen.)
Lieferzeit 5 - 10 Werktage.
Rückgabegarantie
Rückgabegarantie
Wenn Sie aus irgendeinem Grund mit Ihrer Bestellung innerhalb von 7 Tagen nicht zufrieden sind, können Sie sie in neuem Zustand gegen eine Rückerstattung abzüglich der Versandkosten an uns zurücksenden.
DOA-Garantie
DOA-Garantie
Wenn Ihr Artikel beschädigt ankommt, kontaktieren Sie uns bitte innerhalb von 7 Tagen und legen Sie einen eindeutigen und gültigen Nachweis vor. Buy2fix leistet je nach Schadenssituation Ersatz.
Garantie für fehlende/falsche Artikel
Garantie für fehlende/falsche Artikel
Wenn Sie ein Paket mit fehlenden/falschen/Zweitverpackungsartikeln erhalten, kontaktieren Sie uns bitte innerhalb von 7 Tagen nach Zustellung und legen Sie den entsprechenden Nachweis vor. Buy2fix leistet je nach Schadenssituation Ersatz.
1. Adjustable frequency: 5MHz-55MHz for sending and receiving
2. VSWR less than 1.5 at 7MHz/10MHz/14MHz/21MHz
3. Power: within 30W
4. FM 76mhz-108mhz reception
5. Can receive UHF VHF frequency, with transmission auxiliary function
6. Use the knob to adjust the frequency, and the band switch to select the short-wave high and low bands
7. Stretched size 140cm/55.1in (including tuner)
8. Material: stainless steel
9. Top with M4 male connector, output M male or BNC male connector
10. Unstretched size: 30cm (including tuner)
11. Tuner size: 10x3x3 cm
Instructions:
1. The upper knob is the band switch of each frequency, and the lower knob is the fine-tuning of the frequency vibration point. The upper outer ring 11 and the inner ring 50 represent the general position of 11-50MHz. 8 and FM represent the 8Mhz and FM bands. This can be used position, and so on. Then select the knob below to fine-tune to find the standing wave. It is recommended to link the genius to check the vibration point
2. Extended use method: remove the rod antenna, connect a 20-meter long line, set up the long line high or on the roof, the tuning method is the same as above, and the emission efficiency will increase several times. This method can replace the rod antenna
Package Included:
- Tuner x 1
- Antenna x 1
- Adapter x 1